--- minisapserver-0.3.6.orig/debian/README.Debian +++ minisapserver-0.3.6/debian/README.Debian @@ -0,0 +1,4 @@ +minisapserver for Debian +------------------------ + + -- Antonin Kral Tue, 25 Nov 2008 07:19:53 +0100 --- minisapserver-0.3.6.orig/debian/changelog +++ minisapserver-0.3.6/debian/changelog @@ -0,0 +1,33 @@ +minisapserver (0.3.6-1.2) unstable; urgency=medium + + * Non-maintainer upload. + * debian/rules: Add build-{arch,indep} (Closes: #999123). + + -- Marcos Talau Thu, 03 Nov 2022 18:51:48 -0300 + +minisapserver (0.3.6-1.1) unstable; urgency=low + + * Non-maintainer upload. + * Use dh-autoreconf in build to support new architectures (Closes: #727459) + + -- Chen Baozi Fri, 06 Jun 2014 17:33:01 +0800 + +minisapserver (0.3.6-1) unstable; urgency=low + + * New upstream release + * Switched from 'dh_clean -k' to 'dh_prep' + + -- Antonin Kral Wed, 06 Jan 2010 08:20:01 +0100 + +minisapserver (0.3.5-2) unstable; urgency=low + + * Extended description (Closes: #506837) + + -- Antonin Kral Wed, 26 Nov 2008 21:07:24 +0100 + +minisapserver (0.3.5-1) unstable; urgency=low + + * Initial release (Closes: #506837) + + -- Antonin Kral Tue, 25 Nov 2008 07:19:53 +0100 + --- minisapserver-0.3.6.orig/debian/compat +++ minisapserver-0.3.6/debian/compat @@ -0,0 +1 @@ +7 --- minisapserver-0.3.6.orig/debian/control +++ minisapserver-0.3.6/debian/control @@ -0,0 +1,18 @@ +Source: minisapserver +Section: net +Priority: extra +Maintainer: Antonin Kral +Build-Depends: debhelper (>= 7), autotools-dev, dh-autoreconf +Standards-Version: 3.8.3 +Homepage: http://www.videolan.org + +Package: minisapserver +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Mini SAP Server + Mini SAP Server from VideoLan project is a small standalone application that + can produce Session Announcement Protocol (SAP) announcements in Session + Description Protocol (SDP) format. SAP is described in RFC2974. SDP in + RFC4566. + . + This is a mini-sap-server from VideoOnLan project. --- minisapserver-0.3.6.orig/debian/copyright +++ minisapserver-0.3.6/debian/copyright @@ -0,0 +1,23 @@ +This package was debianized by Antonin Kral on +Tue, 25 Nov 2008 07:19:53 +0100. + +It was downloaded from http://www.videolan.org + +Upstream Authors: + + Arnaud Schauly + Clment Stenac + Damien Lucas + Rmi Denis-Courmont + + +Copyright: + + Copyright (C) 1998-2004 VideoLAN + +License: + + GPL (see /usr/share/common-licenses/GPL) + +The Debian packaging is (C) 2008, Antonin Kral and +is licensed under the GPL, see `/usr/share/common-licenses/GPL'. --- minisapserver-0.3.6.orig/debian/dirs +++ minisapserver-0.3.6/debian/dirs @@ -0,0 +1 @@ +usr/bin --- minisapserver-0.3.6.orig/debian/docs +++ minisapserver-0.3.6/debian/docs @@ -0,0 +1,2 @@ +NEWS +README --- minisapserver-0.3.6.orig/debian/init.d +++ minisapserver-0.3.6/debian/init.d @@ -0,0 +1,294 @@ +#!/bin/sh +# +# Example init.d script with LSB support. +# +# Please read this init.d carefully and modify the sections to +# adjust it to the program you want to run. +# +# Copyright (c) 2007 Javier Fernandez-Sanguino +# +# This is free software; you may redistribute it and/or modify +# it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2, +# or (at your option) any later version. +# +# This is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License with +# the Debian operating system, in /usr/share/common-licenses/GPL; if +# not, write to the Free Software Foundation, Inc., 59 Temple Place, +# Suite 330, Boston, MA 02111-1307 USA +# +### BEGIN INIT INFO +# Provides: minisapserver +# Required-Start: $network $local_fs +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Mini SAP server +# Description: Daemon for sending SAP announcements +### END INIT INFO + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +DAEMON=/usr/bin/sapserver +NAME=minisapserver +DESC=minisapserver +LOGDIR=/var/log +DAEMONUSER=daemon + +PIDFILE=/var/run/$NAME.pid + +test -x $DAEMON || exit 0 + +. /lib/lsb/init-functions + +# Default options, these can be overriden by the information +# at /etc/default/$NAME +DAEMON_OPTS="" # Additional options given to the server + +DIETIME=10 # Time to wait for the server to die, in seconds + # If this value is set too low you might not + # let some servers to die gracefully and + # 'restart' will not work + +#STARTTIME=2 # Time to wait for the server to start, in seconds + # If this value is set each time the server is + # started (on start or restart) the script will + # stall to try to determine if it is running + # If it is not set and the server takes time + # to setup a pid file the log message might + # be a false positive (says it did not start + # when it actually did) + +LOGFILE=$LOGDIR/$NAME.log # Server logfile +#DAEMONUSER=minisapserver # Users to run the daemons as. If this value + # is set start-stop-daemon will chuid the server + +# Include defaults if available +if [ -f /etc/default/$NAME ] ; then + . /etc/default/$NAME +fi + +if [ "x$RUN" != "xyes" ] ; then + log_failure_msg "$NAME disabled, please adjust the configuration to your needs " + log_failure_msg "and then set RUN to 'yes' in /etc/default/$NAME to enable it." + exit 0 +fi + +# Check that the user exists (if we set a user) +# Does the user exist? +if [ -n "$DAEMONUSER" ] ; then + if getent passwd | grep -q "^$DAEMONUSER:"; then + # Obtain the uid and gid + DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'` + DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'` + else + log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist." + exit 1 + fi +fi + + +set -e + +running_pid() { +# Check if a given process pid's cmdline matches a given name + pid=$1 + name=$2 + [ -z "$pid" ] && return 1 + [ ! -d /proc/$pid ] && return 1 + cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1` + # Is this the expected server + [ "$cmd" != "$name" ] && return 1 + return 0 +} + +running() { +# Check if the process is running looking at /proc +# (works for all users) + + # No pidfile, probably no daemon present + [ ! -f "$PIDFILE" ] && return 1 + pid=`cat $PIDFILE` + running_pid $pid $DAEMON || return 1 + return 0 +} + +start_server() { +# Start the process using the wrapper + if [ -z "$DAEMONUSER" ] ; then + start-stop-daemon --start --quiet --pidfile $PIDFILE \ + --make-pidfile --background \ + --exec $DAEMON -- $DAEMON_OPTS + errcode=$? + else + start-stop-daemon --start --quiet --pidfile $PIDFILE \ + --chuid $DAEMONUSER --make-pidfile --background \ + --exec $DAEMON -- $DAEMON_OPTS + errcode=$? + fi + return $errcode +} + +stop_server() { +# Stop the process using the wrapper + if [ -z "$DAEMONUSER" ] ; then + killproc -p $PIDFILE $DAEMON + errcode=$? + else +# if we are using a daemonuser then look for process that match + start-stop-daemon --stop --quiet --pidfile $PIDFILE \ + --user $DAEMONUSER \ + --exec $DAEMON + errcode=$? + fi + + return $errcode +} + +reload_server() { + [ ! -f "$PIDFILE" ] && return 1 + pid=pidofproc $PIDFILE # This is the daemon's pid + # Send a SIGHUP + kill -1 $pid + return $? +} + +force_stop() { +# Force the process to die killing it manually + [ ! -e "$PIDFILE" ] && return + if running ; then + kill -15 $pid + # Is it really dead? + sleep "$DIETIME"s + if running ; then + kill -9 $pid + sleep "$DIETIME"s + if running ; then + echo "Cannot kill $NAME (pid=$pid)!" + exit 1 + fi + fi + fi + rm -f $PIDFILE +} + + +case "$1" in + start) + log_daemon_msg "Starting $DESC " "$NAME" + # Check if it's running first + if running ; then + log_progress_msg "apparently already running" + log_end_msg 0 + exit 0 + fi + if start_server ; then + # NOTE: Some servers might die some time after they start, + # this code will detect this issue if STARTTIME is set + # to a reasonable value + [ -n "$STARTTIME" ] && sleep $STARTTIME # Wait some time + if running ; then + # It's ok, the server started and is running + log_end_msg 0 + else + # It is not running after we did start + log_end_msg 1 + fi + else + # Either we could not start it + log_end_msg 1 + fi + ;; + stop) + log_daemon_msg "Stopping $DESC" "$NAME" + if running ; then + # Only stop the server if we see it running + errcode=0 + stop_server || errcode=$? + log_end_msg $errcode + else + # If it's not running don't do anything + log_progress_msg "apparently not running" + log_end_msg 0 + exit 0 + fi + ;; + force-stop) + # First try to stop gracefully the program + $0 stop + if running; then + # If it's still running try to kill it more forcefully + log_daemon_msg "Stopping (force) $DESC" "$NAME" + errcode=0 + force_stop || errcode=$? + log_end_msg $errcode + fi + ;; + restart|force-reload) + log_daemon_msg "Restarting $DESC" "$NAME" + errcode=0 + stop_server || errcode=$? + # Wait some sensible amount, some server need this + [ -n "$DIETIME" ] && sleep $DIETIME + start_server || errcode=$? + [ -n "$STARTTIME" ] && sleep $STARTTIME + running || errcode=$? + log_end_msg $errcode + ;; + status) + + log_daemon_msg "Checking status of $DESC" "$NAME" + if running ; then + log_progress_msg "running" + log_end_msg 0 + else + log_progress_msg "apparently not running" + log_end_msg 1 + exit 1 + fi + ;; + # Use this if the daemon cannot reload + reload) + log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon" + log_warning_msg "cannot re-read the config file (use restart)." + ;; + # And this if it cann + #reload) + # + # If the daemon can reload its config files on the fly + # for example by sending it SIGHUP, do it here. + # + # If the daemon responds to changes in its config file + # directly anyway, make this a do-nothing entry. + # + # log_daemon_msg "Reloading $DESC configuration files" "$NAME" + # if running ; then + # reload_server + # if ! running ; then + # Process died after we tried to reload + # log_progress_msg "died on reload" + # log_end_msg 1 + # exit 1 + # fi + # else + # log_progress_msg "server is not running" + # log_end_msg 1 + # exit 1 + # fi + #;; + + *) + N=/etc/init.d/$NAME + echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2 + exit 1 + ;; +esac + +exit 0 --- minisapserver-0.3.6.orig/debian/minisapserver.default +++ minisapserver-0.3.6/debian/minisapserver.default @@ -0,0 +1,13 @@ +# Defaults for minisapserver initscript +# sourced by /etc/init.d/minisapserver +# installed at /etc/default/minisapserver by the maintainer scripts + +# +# This is a POSIX shell fragment +# + +# Additional options that are passed to the Daemon. +DAEMON_OPTS="" + +# Change to "yes" when want to start daemon after boot +RUN="no" --- minisapserver-0.3.6.orig/debian/rules +++ minisapserver-0.3.6/debian/rules @@ -0,0 +1,111 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE)) +CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) +else +CROSS= --build $(DEB_BUILD_GNU_TYPE) +endif + + + +config.status: configure + dh_testdir + # Add here commands to configure the package. +ifneq "$(wildcard /usr/share/misc/config.sub)" "" + cp -f /usr/share/misc/config.sub config.sub +endif +ifneq "$(wildcard /usr/share/misc/config.guess)" "" + cp -f /usr/share/misc/config.guess config.guess +endif + dh_autoreconf + ./configure $(CROSS) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --sysconfdir=/etc CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs" + + +build: build-stamp + +build-stamp: config.status + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + #docbook-to-man debian/minisapserver.sgml > minisapserver.1 + + touch $@ + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + # Add here commands to clean up after the build process. + [ ! -f Makefile ] || $(MAKE) distclean + rm -f config.sub config.guess + + dh_autoreconf_clean + dh_clean + +install: build + dh_testdir + dh_testroot + dh_prep + dh_installdirs + + # Add here commands to install the package into debian/minisapserver. + $(MAKE) DESTDIR=$(CURDIR)/debian/minisapserver install + + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs ChangeLog + dh_installdocs + dh_installexamples +# dh_install +# dh_installmenu +# dh_installdebconf +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_python + dh_installinit +# dh_installcron +# dh_installinfo + dh_installman + dh_link + dh_strip + dh_compress + dh_fixperms +# dh_perl +# dh_makeshlibs + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch + +build-arch: build +build-indep: build + +.PHONY: build build-arch build-indep clean binary-indep binary-arch binary install --- minisapserver-0.3.6.orig/debian/watch +++ minisapserver-0.3.6/debian/watch @@ -0,0 +1,10 @@ +# Example watch control file for uscan +# Rename this file to "watch" and then you can run the "uscan" command +# to check for upstream updates and more. +# See uscan(1) for format + +# Compulsory line, this is a version 3 file +version=3 + +http://download.videolan.org/pub/videolan/miniSAPserver/(\d+\.\d+\.\d+).* +